免费福利影院-免费福利在线-免费福利在线观看-免费高清a级毛片在线播放-一区二区三区免费-一区二区三区免费观看

點擊這里給我發消息


Mobile :+86 13937199140

PRODUCT CATEGORY

TCB-100A Matte Black Glass Ink of High Dyne Level

來源: 發布時間:2019-04-17

1543384029439021.jpg

This printing ink, meeting the high requirements of the touch screen industry, is two component insulation glass ink of high dyne level. The cured film has various advantages, such as good adhesion, water resistance, chemoresistance, printability,surface hardness and abradability.

Scope of application: common glass, chemically strengthened glass, and physically tempered glass.

Operation process: Add 10 portions of the hardener TCB-100B into 100 portions of this ink and dilute the mixture, then print with the

350~420-mesh halftone.

First coating: baking at 160℃ for 10min;           Second coating: baking at 160℃ for 20min.

Technichal parameters are shown in the following table.

Test Items

Test Tools

Test Results

Fineness

GB/T1724-79

≤12μm

Surface tension

Application criterion of the dyne pen

≥40

Optical density

Application criterion of the optical density (165S420 mesh,

monolayer printing)

4.5

Size change

Quadratic element measuring instrument standard manufacture procedure (165S420 mesh printing)

40μm

Ultrasonic washing

Ordinary detergent, 65, 2hr

Non-foaming;non-wrinkling; non-discoloring; cross-cut adhesion test, 100%

Boiling resistance

Soaking in 100 deionized water for two hours

Non-foaming;non-wrinkling; non-discoloring; cross-cut adhesion test, 100%

High and low temperature humidity and heat cycle

80, 95% RH (8hr); -20(2hr); ten cycles in total

Non-foaming;non-wrinkling; non-discolouring; cross-cut adhesion test, 100%

Hardness

Mitsubishi Pencil at an angle of 45 degrees, 500-gram force, measuring at different locations for 3 times

3H

Adhesion

Cutting 100 grids, 3M gummed paper, continuously pulling off for 5 times

Cross-cut adhesion test, 100%

Surface resistance

Testing surface resistance at 5 locations (≤80%RH)

1010 Ohm

Acid resistance

Soaking in 25 5% H2 SO4 solution for two hours

① Non-foaming; non-wrinkling; non-discolouring;

cross-cut adhesion test, 100%

Alkali resistance

Soaking in 25 5% NaOH solution for two hours

① Non-foaming; non-wrinkling; non-discoloring;

cross-cut adhesion test, 100%

Ethanol tolerance

Tester loaded with 200 grams; using the winsey, dipped with over 99% alcohol, to rub back and forth for 100 times

Colorfast; not tarnishing

Solvent (Acetone) resistance

Tester loaded with 200 grams; using the winsey, dipped with chemically pure acetone, to rub back and forth for 50 times

① Colorfast; not tarnishing

Performance features:

Its obvious predominance lies in environmental compliance, no irritative odor, high surface tension, good thixotropic structure,

medium drying speed and weak corrosion.

Usage:

① Add 1 portion of the matching TCBT-100B hardener into 10 portions of the ink and then fully stir the mixture with moderate thinner before printing.

      ② The recommended baking temperature is 160℃ and the recommended baking time is 10~15 min. On other conditions, please

confirm the feasibility in advance in order not to affect product quality.

③ During the multilayer overprint, in order to ensure the quality, the first coating solidifies after baking at 160℃ for 10 min; the

    second coating solidifies after baking at 160℃ for 20 min.

④ The selection of the thinner types and the thinner dosage depend entirely on the adjustment of printing mesh number,

     environmental condition and printing effect.

Storage condition:

    Before and after using this series of ink, the ink containers should be kept completely sealed in cool and ventilated places to avoid

  exposure to open fire and high temperature.

Guarantee period:

    The guarantee period is one year since the production date. Beyond the deadline, please reconfirm the usability.

Note ①: All the above tolerance test data, derived from our test results, is for your reference only and not listed as guarantee value.

Note ②: This series of ink meets the standard of RoHS2.0, REACH, Halogen and the total test data concerning eight heavy metals.


主站蜘蛛池模板: 久久美女精品 | 天天弄天天操 | 亚洲国产成人久久三区 | 亚洲色图激情 | 性欧美日韩 | 成人中文字幕一区二区三区 | 日韩午夜r电影在线观看 | 女同久久| 美女扒开尿口给男人桶 | 日本卡一卡2卡3卡4精品卡无人区 | 五月天免费在线播放 | 成人久久久精品乱码一区二区三区 | 午夜一区二区免费视频 | 成年人一级片 | 黄视频国产| 欧美婷婷 | 天天射天天干天天插 | 国产69久久精品成人看 | 天天射天天色天天干 | 27pao强力打造高清免费高 | 国产视频黄色 | 亚洲男人天堂手机版 | 一区二区三区四区在线观看视频 | 天天干妹子 | 国产免费好大好硬视频 | 欧美五月激情 | 日本69sex护士www | 麻生希痴汉电车avop130 | 特黄aaaaaa久久片 | 天天干天天操天天操 | 黄色福利小视频 | 天天躁日日躁狠狠躁一级毛片 | 亚洲国产精品婷婷久久久久 | 亚洲综合色视频 | 激情久久久久久久久久 | 男人的亚洲天堂 | 色婷婷国产| 天天躁狠狠躁夜夜躁 | 视频在线观看一区二区 | 俄罗斯一级成人毛片 | 五月天婷婷网亚洲综合在线 |